• Product details
   
•  
•  

   

  
  

   

1.The hospital bed adopts a four piece HDPE material fully enclosed guardrail, which is manufactured by blow molding technology. The distance between the guardrail and t headboard, guardrail and bed tail board, and guardrail is less than 8cm. The guardrail can be retracted to below the bed surface through a one click switch, without occupying space.

2.The four piece split type lifting guardrail is equipped with gas spring buffering device to reduce the speed of lifting and lowering of the guardrail, which can reduce the vibration and impact generated when the guardrail is lowered, and extend the service life of the guardrail; The height from the top of the guardrail to the bed panel is 430mm.

3.Both the front and rear guardrails are equipped with angle displays, and the back lifting function guardrail is marked with clearly enlarged scales of 30 degrees and 45 degrees to help nursing staff clarify the angles at which the back can be raised by 30 degrees and 45 degrees

4.The front guardrail has a built-in storage groove.

5.Equipped with Lei battery display function, it can clearly display the battery status.

6.Equipped with a battery, it can provide position adjustment for more than 30 times in the event of a power outage.

7.The hospital bed is equipped with a total of 6 controllers, including a handheld remote control at the head of the bed, a remote control at the tail of the bed, a remote control on the outside of the guardrails on both sides of the bed, and a remote control on the inside of the guardrails on both sides of the bed; The guardrail adopts 4 sets of embedded lifting controllers, embedded inside and outside the left and right guardrails, and equipped with medical hand controllers; The guardrail belt buttons are built-in non wired control, divided into nursing staff control buttons and patient control buttons.

8.The guardrail has a lowest position indicator light to help nursing staff determine if the bed has been lowered to the lowest position.

9.The bed head & foot board and side rails stickers color is available.

10.Customers can choose between 2 pieces of guardrails with buttons or 4 pieces of guardrails with buttons

11.We also support changing configurations and production according to customers' needs